Since the 1930s, McConnel has been designing and manufacturing innovative agricultural machinery at its Ludlow factory. Sold around the world, its machines range from power arm hedge trimmers which you see attached to tractors maintaining hedgerows a...
TenCate Advanced Armour has secured an order from the Danish Acquisition and Logistics Organisation (DALO) for ballistic protection of the Iver Huitfeldt class frigates and Absalon class support ships of the Royal Danish Navy. The armour systems to b...
Frankfurt, 24th November, 2014: Innovation Pavilion is a first time theme to be used for Plastindia Fairs and is going to be an exciting place to visit for all interested in modern development using plastics. We want this to be of utmost importance t...
NISSEI PLASTIC INDUSTRIAL CO., LTD. will be exhibiting at the "16th DMP Dongguan International Plastics, Packaging & Rubber Exhibition (DMP2014)" in Dongguan, China, from November 19th to 22nd. NISSEI will bring three types of injection molding machi...
ROCHESTER, NEW YORK, USA November 7, 2014 Gleason Corporation announces the introduction of the 100S Gear Shaping Machine, featuring a class-leading stroke rate of up to 3,000 strokes per minute. The 100S is ideally suited to small face widths gears...
Following on from its successful use in the aeronautics sector, C-PLY™ is set to be a key material in Jean-Marie Finot's latest yacht, THE ALBATROS. Both the hull and the deck of the boat will be made from C-PLY™, CHOMARAT's range of carb...
Perstorp the world leader in e-polycaprolactones (PCL) technology, marketed under the Capa™ brand, is stepping up its investment into the fast growing bioplastics market. World demand is expected to continue to grow at over 20% pa for the fores...
Royal DSM, the global Life Sciences and Materials Sciences company, says a combination of two of its most innovative thermoplastics technologies has resulted in high performance pressure vessels that are ideally suited for use as lightweight fuel tan...
Ghent, Belgium - Milliken & Company unveiled today, at Pack Expo International (booth #10513), Hyperform® HPN 210 M, a new, game-changing nucleating agent for injection molded high-density polyethylene (HDPE) applications. This new breakthrough ...
East Aurora, NY, USA, November 5, 2014 - Moog Industrial Group, a part of Moog Inc. (NYSE: MOG.A AND MOG.B), has been working with their global Formula 1 (F1) customers to help them meet the challenges of 2014 Fédération Internationale ...
The School of Engineering at Cardiff University and Haydale demonstrate that plasma functionalisation technology produces improvements in mechanical performance and damage tolerance in carbon fibre composites.
...
Since the 1930s, McConnel has been designing and manufacturing innovative agricultural machinery at its Ludlow factory. Sold around the world, its machines range from power arm hedge trimmers which you see attached to tractors maintaining hedgerows a...
TenCate Advanced Armour has secured an order from the Danish Acquisition and Logistics Organisation (DALO) for ballistic protection of the Iver Huitfeldt class frigates and Absalon class support ships of the Royal Danish Navy. The armour systems to b...
At 0.76mm thin, pressure sensor is also the only one in a fully molded package, enabling higher-accuracy measurements
...
NISSEI PLASTIC INDUSTRIAL CO., LTD. will be exhibiting at the "16th DMP Dongguan International Plastics, Packaging & Rubber Exhibition (DMP2014)" in Dongguan, China, from November 19th to 22nd. NISSEI will bring three types of injection molding machi...
ROCHESTER, NEW YORK, USA November 7, 2014 Gleason Corporation announces the introduction of the 100S Gear Shaping Machine, featuring a class-leading stroke rate of up to 3,000 strokes per minute. The 100S is ideally suited to small face widths gears...
Lectra's brain of the cutting room, Optiplan, continues to evolve
...
MARLBOROUGH, Mass. - Qualtré, Inc introduced today the QGYR110Hx BAW MEMS gyroscopes, single-axis angular rate (rotational) sensors designed for harsh environments. Based on Qualtré''s patented Bulk Acoustic Wave (BAW) MEMS technology, ...
Following on from its successful use in the aeronautics sector, C-PLY™ is set to be a key material in Jean-Marie Finot's latest yacht, THE ALBATROS. Both the hull and the deck of the boat will be made from C-PLY™, CHOMARAT's range of carb...
- Infineon Defines New Levels of Low Switching Losses and High Power Density
...
Perstorp the world leader in e-polycaprolactones (PCL) technology, marketed under the Capa™ brand, is stepping up its investment into the fast growing bioplastics market. World demand is expected to continue to grow at over 20% pa for the fores...
Lumberg Automation M12 Cord Sets Ensure High Data Volume Transfers in Industrial Ethernet Applications
...
Royal DSM, the global Life Sciences and Materials Sciences company, says a combination of two of its most innovative thermoplastics technologies has resulted in high performance pressure vessels that are ideally suited for use as lightweight fuel tan...
Ghent, Belgium - Milliken & Company unveiled today, at Pack Expo International (booth #10513), Hyperform® HPN 210 M, a new, game-changing nucleating agent for injection molded high-density polyethylene (HDPE) applications. This new breakthrough ...
East Aurora, NY, USA, November 5, 2014 - Moog Industrial Group, a part of Moog Inc. (NYSE: MOG.A AND MOG.B), has been working with their global Formula 1 (F1) customers to help them meet the challenges of 2014 Fédération Internationale ...
Ahlstrom, a global high performance fiber-based materials company, launches Ahlstrom AceBlade Carbon, a new product for the wind energy market.
...