News - Events - Chinese Version
Search Product, Company or News
Home > Transportation & Automobile > Aviation & Aerospace System > News
Cytec Industries Inc. logo
Cytec Industries Inc.
Company  |  Products  |  News  |  Contact Us

Cytec Exhibits at CAMX 2015 and Presents its Composite Materials Portfolio to the Market

10/27/2015

New composite materials and technologies for high volume automotive production
Out of Autoclave portfolio for Aerospace applications
Value added vacuum bagging process materials kitting service
CAMX - Booth S78

21 October 2015 - Woodland Park, NJ - Cytec Industries Inc. (CYT) will be presenting information on its end to end composite portfolio, including structural and tooling prepregs, resin infusion systems and structural adhesives that are complemented by a range of process materials available as roll stock or tailored kits.

"Our ability to offer the full spectrum of fibers, composite materials, adhesives and ancillaries, together with our Application Engineering expertise, gives Cytec the opportunity to partner with our customers and offer fully encompassing solutions through the integration of design, materials and processes. Our technology team continues to develop materials technologies that address the need for performance, affordability and rate in a range of industries including serial automotive, aerospace and defense" said Carmelo LoFaro, Cytec Chief Technology Officer.

Specific focus will be put on:

Aerospace: Cytec's out of autoclave (OOA) product collection include vacuum bag only (VBO) prepregs such as CYCOM® 5320-1 and MTM® 45-1, and the primary structure ready PRISM® EP2400 resin system. Cytec OOA products are an essential element in reducing non-recurring and recurring manufacturing costs.

Automotive: Cytec's new rapid cure resin systems for hot compression molding of tailored prepreg flat blanks with MTM® 710 and MTM® 23 as well as HP-RTM with XMTR50TM.
Tooling: Cytec will promote its innovative DForm Fabric Tooling prepreg, which was launched earlier this year. Cytec believes DForm will transform composite tooling manufacture by reducing tool layup times by 75%, and making composite tooling more competitive than ever against metal tooling.

Process Materials: Cytec will promote its value added vacuum bagging process materials kitting service out of its USA sites. Kitting brings great benefits to part manufacturers such as reduced labor cost, total production time and waste as well as improved process control and therefore part quality and repeatability.


HP-RTM equipment in Use at Penso Consulting Ltd.

Visitors can learn more about Cytec's products on the stand as demonstrated by:

A complex contour fuselage frame, manufactured using Cytec's PRISM® EP2450 resin system and CYCOM® 7720 RTM preform binder.
A structural fairing cover cured out of autoclave and manufactured from Cytec's CYCOM® 5320-1 prepreg, FM® 309-1M adhesive and Surface Master® 905.
A complex part manufactured from uni-directional carbon fiber, utilizing an innovative automated preforming process which requires virtually no direct labor and is capable of producing parts such as structural automotive components for body-in-white structures with a sub 5 minutes takt time.
Two identical composite tools - one manufactured using Cytec traditional epoxy tooling prepreg and the other one manufactured using Cytec's new DForm Fabric Tooling epoxy prepreg.
A selection of vacuum bagging process materials, in roll and kit formats.

Cytec will present 5 papers during the technical conference:

Tue. October 27| 4:00 PM - 4:25 PM | D172 - Yiqiang Zhao: Non-Chromated Water Based Primers for Aerospace Structural Bonding Applications
Wed. October 28| 3:00 PM - 3:25 PM | D171 - Anthony Hinman: Resin Infusion for Highly Tailored, Weight Optimized, Complex Contour, Primary Structure for Rotorcraft
Wed. October 28| 3:30 PM - 3:55 PM | D171 - Chris Ridgard: Process Selection and Optimization for Out-of-Autoclave Prepreg Structures
Wed. October 28| 4:00 PM - 4:25 PM | D171 - Anthony Hinman: Toolside Surface Quality of Out-of-Autoclave Versus Autoclave Laminates
Thu. October 29| 4:30 PM - 4:55 PM | D161 - Jon Grigson: Practical Use of DForm® Fabric Tooling Prepreg - Epoxy and BMI

Cytec also invites the show visitors to come to their stand to attend a series of mini-presentation on Cytec's key technologies and product ranges:

Day 1 - Tuesday 27

11.30 - 12.00: Out of Autoclave (OOA) or Vacuum Bag Oven (VBO) Technology for Aerospace
13.00 - 13.30: Process Materials Value Added Kitting Service
14.00 - 14.30: Tool Side Surface Quality of Out of Autoclave (OOA) vs Autoclave Laminates
15.30 - 16.00: New Rapid Cure Materials for Hot Compression Molding in Automotive Applications

Day 2 - Wednesday 28

10.30 - 11.00: Tool Side Surface Quality of Out of Autoclave (OOA) vs Autoclave Laminates
11.30 - 12.00: Out of Autoclave (OOA) or Vacuum Bag Oven (VBO) Technology for Aerospace
13.00 - 13.30: Process Materials Value Added Kitting Service
13.30 - 14.00: New Rapid Cure Materials for Hot Compression Molding in Automotive Applications
For more information, visit Cytec at CAMX 2015, Booth S78.


Manufacture of large complex kits for the aerospace industry.

Cytec provides advanced composite and process materials for aerospace, automotive, wind energy, motorsport, marine, mass transportation and other demanding applications. Our focus on technology and application expertise allows customers to adopt more efficient manufacturing approaches. Our product portfolio supports the end-to-end manufacturing of composite parts and includes tooling, fiber, prepregs, resin systems, vacuum bagging, adhesives and surfacing films.

Related Exhibition:
CAMX 2015
The Composites and Advanced Materials Expo
10/26/2015 - 10/29/2015
Venue: Dallas Convention Center, Dallas TX, United States

Related News
  • Alfa Laval environmental products will be installed on the Petrofac JSD6000 6/24/2015
  • ECDIS Ltd. and FURUNO join forces in ECDIS training 5/12/2015
  • HANSEN PROTECTION AS releases its new approved Emergency Breathing System designed for helicopter crews and passengers 1/21/2015
  • Hexcel congratulates Airbus on achieving Type Certification for the A350 XWB 10/2/2014
  • Hexcel Congratulates Airbus on the A320neo Maiden Flight 9/27/2014
  • Hexcel Promotes Composites For Aerospace, Automotive and Wind Energy at Composites Europe 2014 9/26/2014
  • ILA 2014: Rohde & Schwarz presents its portfolio for safer airborne radiocommunications 5/6/2014
  • Airbus will make a presentation during SAMPE BRAZIL 2014 2/27/2014
  • Chomarat presents the first C-Ply™ aircraft: VX-1 KittyHawk™ 2/18/2014
  • Bombardier Selects Moog Aerospace Test System for Full Scale Structural Test on Advanced Carbon Fibre Wing 2/5/2014
  • Aviation & Aerospace System Exhibitions
    Innovative Aircraft Seating 2019
    10/14/2019 - 10/17/2019
    Hamburg, Germany
    Seoul ADEX 2019
    10/15/2019 - 10/20/2019
    Seoul, South Korea
    MRO Europe 2019
    10/15/2019 - 10/17/2019
    London, United Kingdom
    Global Airport & Passenger Symposium 2019
    10/15/2019 - 10/17/2019
    Warsaw, Poland
    CIGAC 2019
    10/17/2019 - 10/21/2019
    Xian, China
    More Trade Shows


    About newMaker | Gold Suppliers | Contact Us | showsbee.com | showseye.com | newMaker China | My newMaker  
    © newMaker.com. All Rights Reserved