News - Events - Chinese
Search  
Home > Die & Mould > Plastic Mould > News
Husky Injection Molding Systems Ltd. logo
Husky Injection Molding Systems Ltd.
Company  |  Products  |  News  |  Contact Us

Husky demonstrates range of innovative technologies for beverage packaging at NPE 2015

3/24/2015

including revolutionary self-cleaning mold technology for HyPET HPP5

BOLTON, Ontario - A one push-button mold cleaning in eight seconds instead of four hours, and ten times fewer cleaning interventions on a machine: Husky Injection Molding Systems today announced that at NPE 2015 (March 23 - 27, Orlando, Florida), it will provide live demonstrations of its revolutionary new self-cleaning mold technology for the HyPET® HPP5 preform manufacturing system, located at Booth #2117 in the West Hall. The new mold feature is part of the reduced maintenance package for the HyPET® HPP5 system and can extend cleaning and greasing requirements to approximately every 500,000 cycles. This represents a dramatic improvement over conventional technology in the industry.

"With cycle times getting faster, one could expect shorter maintenance intervals, more maintenance, and shorter mold life. Instead, HyPET® HPP5 overcomes the contradiction between cycle time and mold maintenance. Self-cleaning can eliminate up to 400 hours of maintenance time per year, which results in 5% more production time," said Nicolas Rivollet, Husky's Director of Business Development. Self-cleaning is a push-button that uses controlled flash of the tool to collect and remove dust built up in the vents. Completely automated, totally reliable, and consistent, self-cleaning does not require an operator to go inside the machine, and can be performed as often as needed as there is virtually zero time penalty on production.

The system at NPE will also be equipped with Husky's enhanced mold alignment technology that enables time to first refurbishment to be extended three times, while improving cycle times and part quality. Using six sensors to detect the position of the core plate with respect to the cavity plate, the HyPET® HPP5 mold alignment is a real-time, 3D measurement of the alignment displayed as constant feedback on the HMI. If misalignment occurs, the HMI provides specific instructions to resolve it. By simply turning a positioning device, the operator can re-align the tool with a resolution of a few microns, before the offset can cause excessive wear and impact quality.

Since its launch in late 2013, the HyPET® HPP5 system has had a very strong response from customers. In a short sixteen months the company has sold over seventy systems, with nearly forty installed and producing high quality preforms in customer facilities across the globe. The HyPET® HPP5 system at NPE will run a lightweight carbonated water preform application with a 10.89 gram part weight on a 96cav 50x140 pitch mold at a very aggressive 5.5 second cycle time. With this preform, HyPET® HPP5 is approximately 50% faster than the industry averages for the same type of applications.

"We continue to make significant investments to better understand the production issues our customers face so that we can offer new technologies to respond to these challenges. This is what we will demonstrate at NPE 2015," said Robert Domodossola, Vice President of Engineering and Business Development at Husky. "With our latest innovations we have paid particular attention to improving availability, as producing better parts at a lower cost for longer production intervals ensures customers can be more competitive."

Offering a whole new experience for Husky customers, the display at NPE will focus on providing visitors a more intimate opportunity to engage with Husky solutions and representatives. Holding the leading market share of high-volume PET manufacturing equipment, Husky offers a full suite of equipment and services for the plastics industry, and an unmatched level of global support in over 40 countries. Serving the industry for more than 35 years, Husky's preform injection molding workcells deliver the industry's lowest total production costs for the widest range of applications and capacity needs. Value-added services include preform development, factory planning, customer training, systems integration and complete asset management.

Related Exhibition:
NPE 2015
The International Plastics Showcase
3/23/2015 - 3/27/2015
Venue: Orange County Convention Center, Orlando FL, United States

Related News
  • Husky showcases new barrier solution, demonstrates range of innovative technologies for beverage packaging, medical and hot runners at NPE 2015 1/20/2015
  • Trexel, Inc. and Milacron enter into Partnership Agreement for MuCell® Injection Molding Technology 11/6/2014
  • Husky takes hot runner and controller capability to the next level - innovative technologies for total mold control at Fakuma 2014 10/5/2014
  • INCOE Corporation Announces the Grand Opening of their New European Headquarters 6/4/2014
  • Husky introduces UNIFY™ manifold systems at Chinaplas 2014 4/29/2014
  • INCOE® Introduces HEM Miniature Hydraulics and VIX Tips at Euromold 2013 12/6/2013
  • Husky launches HyPET® HPP5 Preform Moulding System 11/16/2013
  • K Show 2013: RocTool presents three last generation technologies for quick molding 9/26/2013
  • PRIAMUS: Easy Sensor Mounting with PRIAFIT® 9/17/2013
  • FILLCONTROL: Automatic Valve Gate Control for Cold Runners 9/17/2013
  • Plastic Mould Exhibitions
    Rotomould 2017
    6/25/2017 - 6/27/2017
    Melbourne, Australia
    M'SIA-PLAS 2017
    7/27/2017 - 7/30/2017
    Kuala Lumpur, Malaysia
    Taimold 2017
    9/6/2017 - 9/9/2017
    Taipei, Taiwan
    SPE Thermoforming Conference® 2017
    9/11/2017 - 9/14/2017
    Orlando FL, United States
    Wuhan Plastics & Packaging Exhibition 2017
    9/20/2017 - 9/23/2017
    Wuhan, China
    More Trade Shows


    About newMaker | Gold Suppliers | Contact Us | showsbee.com | showseye.com | newMaker China | My newMaker  
    © newMaker.com. All Rights Reserved