This lathe mainly makes medium and small-scale part holing, reaming, reaming, attacking the whorl, shaving the level,etc. to process and use, it is the most largely to hole the diameter is 40 millimetres, suitable for single one, the small machining workshop that produces in batches and machine repair workshop use. Compared with lathe of the same type both at home and abroad, have the characteristics that horsepower is small, rigidity is big.
Technical parameter
Diameter that it is the most largely to hole 40 mm main shaft axis line is to the distance of bus bar of the post 300 mm main shaft terminal surface is to the largest distance of mesa of job 800 mm main shaft terminal surface is to the largest distance of job mesa of the base The greatest journey of 1260 mm main shaft case 270 mm Workingbench, the largest distance of bracket 550 mm main shaft's greatest journey 150 mm main shaft terminal surface is to the largest distance of job mesa of the base 1200 / 260 Mm main shaft taper hole () Morse No.4 Range of rotational speed of the main shaft 52 80 105 160 210 260 320 400 530 800 1100 1650 r.p.m 主轴转速级数 12 steps
工作台有效工作面积（长×宽） 600×320 mm
底座有效工作面积（长×宽） 440×320 mm
YD100L1-6/4 功率 1.3/1.8 kw
双速三相 电压 360V
交流电动机 转速 940/1440 r.p.m
机床最大外形尺寸（长×宽×高） 941×617×1995 mm
机床净重 670 kg
Website:
Http://shwudong.cn.china.cn
Telephone:
86-021-13311849651
Address:
59 Hangfan Road Hangtou Town Nanhui District, Shanghai, China
