Shock increase soot-blowing system is the working principle of combustible gases (acetylene, gas, natural gas, liquefied petroleum gas, etc.) and air mixture formed by a certain proportion of premixed gases, in particular the turbulent combustion chamber design in rapid combustion, and pulse detonation cavity in a high-speed pulse jet accelerated, the fan-like wave generator by the end to the heating surface emission stream erosion and strong acoustic excitation and falling out of gas and was taken away. Because it is so fan-like shock ash increased the scope.
System Shock enhanced by soot blowing gas source, flow measurement unit, mixed-ignition modules, soot blowing distribution unit, soot-blowing power unit, a control unit for soot blowing.
Technical characteristics:
1, Ash ability. It is not only hard to remove ash but also to remove the thick ash Oil Furnace Lane.
2, the role of a wide area. The barrier-free space, the Ash-enhanced pulse output can be removed from the mouth eight meters around knot ash.
3, Ash high efficiency. Ash and steam compared to only travel a weekly meeting.
4, Ash effective. Ash running enhanced pulse device, the exhaust gas temperature may drop 5-30 ¡æ.
5, operating costs low. Compared with steam soot-blowing operation can run six months to recover the full cost of investment.
6, the equipment is simple, reliable operation.
7, soot-blowing for the release of energy and effective soot blower large space, soot-blowing time is short, quick and hard gray, soft ash were blown apart from Colombia effectively leaving no quarter.
8, soot blowing medium temperatures are high, heating surface drying, corrosion reduced soot blowing interval length, operating costs low.
9, soot-blowing power unit without moving parts, to avoid a lot of equipment maintenance, extend the service life of the equipment, reducing manual labor intensity.
10, Ash-blown completely avoid the wet scaling caused the negative impact.
11, Ash were better than Sonic soot blowing ash and steam.
