|
|
Direct-Flo™ Gold Systems
|
|
DF Gold systems are designed from years of in field processing experience offering increased hot runner performance and robustness while maximizing molder up-time. Applications include Automotive, Aerospace, Closures, Medical, Pharmaceutical, Appliance, Technical and Electronics parts.
Gate Styles
Thermal Tip, Open, Sprue and Valve.
Nozzle Design
INCOE® nozzle designs offer 2 types of mounting onto the manifold system based on your application.
DFQ style DFX style
Nozzles have a threaded base which screws directly into the manifold. This ensures a secure, leak proof connection to the manifold and facilitates construction of our Unitized systems. Utilizes a compression fit onto the manifold. Mold back and retainer plates secure the entire system in place.
Multi Zone Nozzles
Typical in large part applications requiring longer lengths, INCOE®'s multi zone nozzles use separate multiple heaters to ensure the heat profile can be precisely controlled. Available on our DF8 - DF25 series, these multi zone nozzles provide optimal thermal control over the entire length of the nozzle.
Twin Heater Technology
INCOE® nozzles are equipped with twin heater technology. Heating elements are connected in parallel to a single set of leads from the heaters. If one element burns out, the redundant heater continues seamless operation until routine maintenance can be performed.
Shot Weight
The DF Gold nozzle types process from <110g up to 9000g shot weights.
Nozzles Shot Ranges
DF5 (5 mm channel) <110g
DF8 (8 mm channel) 30-675g
DF12 (12 mm channel) 140-2000g
DF18 (18 mm channel) 420-3500g
DF25 (25 mm channel) 900-9000g |
|
Related Products |
| MuCell® Molding Technology Trexel, Inc. The most significant plastic processing
innovation in the last 20 years
The MuCell® microcellular foam injection molding process for thermoplastics ... | | SIGMA-elastomer SIGMA Engineering GmbH SIGMASOFT? for the Process Simulation of Elastomer Parts
SIGMASOFT-elastomer is a complex tool for the producer of elastomer parts and moulds helping ... | | SIGMA-thermoplast SIGMA Engineering GmbH SIGMASOFT? for the Process Simulation of Thermoplast Parts with Three Dimensional Volume Models
SIGMASOFT? is a complex tool for the producer of thermoplast ... | | PRIAMUS Heat Priamus System Technologies AG Automatic control of elastomer and thermoset applications
- Automatic balancing of mold surface temperature
- Uniform temperature distribution on ... | | PRIAMUS Fill Hotrunner interfaces Priamus System Technologies AG Automatic hotrunner control
- Mulit cavity molds
- Multi component molds
- Cluster molds
- Family molds
- Weld lines
- Sequential molding
- ... |
|
|
|
|