News - Events - Chinese Version
Search Product, Company or News
Home > Die & Mould > Plastic Mould > SAVE the Planet
Frigel Firenze SpA logo
Frigel Firenze SpA
Company  |  Products  |  News  |  Contact Us
SAVE the Planet
High Precision Controllers for High Temperatures

The TRP series of Thermogel units are pressurized water temperature controller with indirect cooling. TRP have been made to condition molds and cylinders in the plastic and rubber sector, as an alternative to the traditional diathermic oil units. The TRP guarantee high precision and production quality, a maximum process repetitiveness and efficiency, minimum operating costs, practicality and safety of use.

??he TRP are equipped with sophisticated electronics and a particular hydraulic circuit which allow a high precision to be obtained in controlling the operating temperature (? 0.3?C).??eat exchanger with ??old??operation to eliminate the problem of scale inside the exchanger itself.
??he control panel is characterised by a simple and easy-to-use interface with a display for reading the temperature with large characters and a large alphanumerical management screen.
??arious parameters and the machine status can be controlled by means of a powerful microprocessor and the operating parameters and alarm messages can be visualised continually. All the messages are displayed in the language selected by the operator, amongst the five available.
??he TRP can be interfaced with the production machines with which they can communicate. Various serial communication software protocols are available of the most famous brands.
??ll the models have high performance pumps capable of providing the process with sufficient flows and pressure to guarantee an excellent temperature distribution. The pressure is constantly monitored and may be regulated by the operator by means of the regulation by-pass in order to obtain the best results for the utility. The pumps have special seals and can operate in environments with temperatures of up to +60?C (140?F).
??he Thermogel units are fitted with automatic loading.
??ll the piping, the tank and the connection parts used are made 100% of rust-resistant materials to guarantee the maximum lifetime. The parts used are all of prime quality and designed to operate in a continuous cycle in the most stressful environmental and process conditions.
??he Thermogel TRP unit is available with heating powers of 6, 12 and 18 kW by means of low surface load incoloy heating elements.
??he Thermogel TRP have been designed paying maximum attention to the safety of the operator and the process against all possible hazards.

Related Products
Special nozzles
GÜNTHER Heisskanaltechnik GmbH
Multi-tip nozzlesg The hot-runner nozzles for side gating give you the ideal scope in designing your hot-runner systems. Special attention was paid therefore ...
Needle valve
GÜNTHER Heisskanaltechnik GmbH
Valve-gate systems The nozzle types listed in this chapter cover a wide range of uses. The modular nozzle design allows a rapid replacement of components ...
Hot runner nozzles
GÜNTHER Heisskanaltechnik GmbH
Hot runner nozzles Standard hot runner nozzles for direct gating from 0.0189 to 5 kg per nozzle. If required, the modular nozzle design allows ...
Shanghai SURE Hot Runner Nozzle
Shanghai SURE Hot Runner Electric LTD
1, The gate area is decided by the client 2, To prolong gate life, gate point must have heat treatment 3, The gate is always in open state 4, It has ...

Plastic Mould Exhibitions
INNOFORM 2020
3/3/2020 - 3/5/2020
Bydgoszcz, Poland
CWIIF 2020
3/6/2020 - 3/8/2020
Wenzhou, China
Eurostampi & Plastic 2020
3/26/2020 - 3/28/2020
Parma, Italy
ARM Executive Forum with IT-RO 2020
3/30/2020 - 4/3/2020
Lake Garda, Italy
Plast Expo UA 2020
3/31/2020 - 4/3/2020
Kiev, Ukraine
More Trade Shows


About newMaker | Gold Suppliers | Contact Us | showsbee.com | showseye.com | newMaker China | My newMaker  
© newMaker.com. All Rights Reserved