|
|
|
DNP3 Ethernet Module for ControlLogix®
Model: MVI56E-DNPNET
|
|
| DNP3 Ethernet Module for ControlLogix?MVI56E-DNPNETThe MVI56E DNP3 Ethernet Communication Module allows Rockwell Automation ControlLogix ? PACs to interface on a DNP3 Ethernet network. The module supports operation as an Ethernet Client with up to 40 DNP3 Ethernet server devices such as RTU''s, IED''s, and various protection relays. With support for 300 user definable commands and a maximum of up to 20,000 points of data, the module can be used to obtain data from a network of devices over a DNP3 Ethernet link.Additionally the module can simultaneously operate as a DNP3 Ethernet server allowing the unit to interface to other client devices such as SCADA and DCS systems using the DNP3 protocol. With a large event data storage for up to 20,000 time stamped events, the module will buffer event data during a loss of communications with the DNP3 client device, reporting this information when communications has been re-established.The module utilizes an Add-On Instruction in RSLogix 5000 for the configuration and setup of the module, allowing configuration data to be stored in the PAC ladder code. Remote diagnostics of the unit can be performed using the ProSoft Configuration Builder utility or through controller tags available in RSLogix 5000.SpecificationsSingle-slot 1756 ControlLogix backplane compatible10/100 Mbps auto crossover detection Ethernet configuration and application portUser-definable module data memoryCIPconnect-enabled network diagnostics monitoring using ControlLogix 1756-ENxT and 1756-CNB modules and EtherNet/IP pass-through communicationAdd-On Instructions (AOI) are used for data transfer between module and processorProSoft Discovery Service (PDS) software used to locate the module on the network and assign temporary IP addressHardwareSpecificationDescriptionBackplane Current Load800 mA @ 5 V DC3 mA @ 24 VdcOperating Temperature0o to 60oC (32o to 140oF) all models except XTStorage Temperature-40o to 85oC (-40o to 185oF)Shock:30g Operational50g non-operationalVibration5 g from 10 Hz to 150 HzRelative Humidity5 to 95% (non-condensing)LED Indicator:Battery Status (ERR)Application Status (APP)Module Status (OK)4-Character DisplayIncluded on all XT modules; optional on all other modulesEthernet Port10/100 Base-T, RJ45 Connector, for CAT5 cableLink and Activity LED indicatorsAuto-crossover cable detectionShipped with Unit5-foot Ethernet straight-through cable |
|
|
|
|
Ethernet to Belden 9463 Blue Hose Industrial Media Converters
